- Masayuki Yokota, Teppei Koyama and Kazufumi Takeda, “Digital holographic inspection system for the inner surface of a straight pipe,” Optics and Lasers in Engineering, Vol. 97, pp. 62-70 (2017).
- M. Yokota,“Digital holography for inspection of Drying Process of Paint Films,” Journal of the Imaging Society of Japan, Vol. 55, No. 6, pp. 697-703 (2016). Invited Review
- Y. Takahashi, K. Morishima, and M. Yokota, “Defect Detection in Optical Disk Substrate by Mach-Zehnder Interferometer,”Key Engineering Materials, Vol. 534, pp. 149-153 (2013).
- M. Yokota and Y. Kimoto,“Combination method of digital holography and gravimetric measurement for assessment of a paint drying process,” Opt.Eng., Vol. 52, No. 1, pp. 015801-1-015801-10 (2013).
- M. Yokota and T. Adachi, "Digital holographic profilometry of the inner surface of a pipe using a current-induced wavelength change of a laser diode," Appl. Opt., Vol. 50, No. 21, pp. 3937-3946 (2011).
- M. Yokota, T.Kawakami, Y. Kimoto, and I. Yamaguchi,"Drying process in a solvent-based paint analyzed by phase-shifting digital holography and an estimation of time for tack free," Appl. Opt., Vol. 50, No. 30, pp. 5834-5841 (2011).
- M. Yokota, T. Adachi and I. Yamaguchi," Monitoring and evaluation of drying of paint by using phase-shifting digital holography," Opt. Eng., Vol.49, pp. 015801-1-4 (2010).
- M. Yokota and N. Ishitobi, "Estimation of inner surface profile of
a tube by two-wavelength phase-shifting digital holography," Opt.
Rev., Vol. 17, No. 3, pp. 166-170 (2010).
- Y.Fujii, K. Shimada, K. Maru, M. Yokota, S. Hashimoto, N. Nagai and Y. Sugita, "Instrument for Measuring the Body Mass of Astronaut", Trans. Jpn. Soc. Aeronaut. Space Sci., (in press).
- I. Yamaguchi and M. Yokota, "Speckle noise suppression in measurement by phase-shifting digital holography," Opt. Eng., Vol.48, pp.085602-1-6 (2009)
- M. Yokota, T. Adachi and I. Yamaguchi,"Monitoring and evaluation of drying of paint by using phase-shifting digital holography," Opt. Eng., Accepted for publication.
- M. Yokota and N. Ishitobi, "An estimation of inner surface profile of aluminum tube by two wavelengths phase-shifting digital holography," Optical Review, Accepted for publication
- I. Yamaguchi, T. Ida and M. Yokota, "Measurement of surface shape and position by phase-shifting digital holography", Strain, Vol. 44, pp. 349-356 (2008)
- Y. Fujii, K. Shimada, M. Yokota, S. Hashimoto, Y. Sugita, and H. Ito, “Mass measuring instrument for use under microgravity conditions”, Rev. Sci. Instrum., Vol.79, No. 5, 056105-1-3 (2008)
- M. Yokota, "Polarization analysis by off-axis digital holography with an improved optical system and an evaluation of its performance by simulation", Appl. Opt., Vol. 47, No. 34, pp. 6325-6333 (2008)