Publication一覧

Papers

 

2017

  • Masayuki Yokota, Teppei Koyama and Kazufumi Takeda, “Digital holographic inspection system for the inner surface of a straight pipe,” Optics and Lasers in Engineering, Vol. 97, pp. 62-70 (2017).

 

2016

  • M. Yokota,“Digital holography for inspection of Drying Process of Paint Films,” Journal of the Imaging Society of Japan, Vol. 55, No. 6, pp. 697-703 (2016). Invited Review

 

2013

  • Y. Takahashi, K. Morishima, and M. Yokota, “Defect Detection in Optical Disk Substrate by Mach-Zehnder Interferometer,”Key Engineering Materials, Vol. 534, pp. 149-153 (2013).
  • M. Yokota and Y. Kimoto,“Combination method of digital holography and gravimetric measurement for assessment of a paint drying process,” Opt.Eng., Vol. 52, No. 1, pp. 015801-1-015801-10 (2013).

 

2011

  • M. Yokota and T. Adachi, "Digital holographic profilometry of the inner surface of a pipe using a current-induced wavelength change of a laser diode," Appl. Opt., Vol. 50, No. 21, pp. 3937-3946 (2011).
  • M. Yokota, T.Kawakami, Y. Kimoto, and I. Yamaguchi,"Drying process in a solvent-based paint analyzed by phase-shifting digital holography and an estimation of time for tack free," Appl. Opt., Vol. 50, No. 30, pp. 5834-5841 (2011).

 

2010

  • M. Yokota, T. Adachi and I. Yamaguchi," Monitoring and evaluation of drying of paint by using phase-shifting digital holography," Opt. Eng., Vol.49, pp. 015801-1-4 (2010).
  • M. Yokota and N. Ishitobi, "Estimation of inner surface profile of a tube by two-wavelength phase-shifting digital holography," Opt. Rev., Vol. 17, No. 3, pp. 166-170 (2010).

 

2009

  • Y.Fujii, K. Shimada, K. Maru, M. Yokota, S. Hashimoto, N. Nagai and Y. Sugita, "Instrument for Measuring the Body Mass of Astronaut", Trans. Jpn. Soc. Aeronaut. Space Sci., (in press).
  • I. Yamaguchi and M. Yokota, "Speckle noise suppression in measurement by phase-shifting digital holography," Opt. Eng., Vol.48, pp.085602-1-6 (2009)
  • M. Yokota, T. Adachi and I. Yamaguchi,"Monitoring and evaluation of drying of paint by using phase-shifting digital holography," Opt. Eng., Accepted for publication.
  • M. Yokota and N. Ishitobi, "An estimation of inner surface profile of aluminum tube by two wavelengths phase-shifting digital holography," Optical Review,  Accepted for publication

 

2008

  • I. Yamaguchi, T. Ida and M. Yokota, "Measurement of surface shape and position by phase-shifting digital holography", Strain, Vol. 44, pp. 349-356 (2008)
  • Y. Fujii, K. Shimada, M. Yokota, S. Hashimoto, Y. Sugita, and H. Ito, “Mass measuring instrument for use under microgravity conditions”, Rev. Sci. Instrum., Vol.79, No. 5, 056105-1-3 (2008)
  • M. Yokota, "Polarization analysis by off-axis digital holography with an improved optical system and an evaluation of its performance by simulation", Appl. Opt., Vol. 47, No. 34, pp. 6325-6333 (2008)

 

2017年03月15日

International Conferences

※Red letters : presented by students

2016

  • M. Yokota, “Digital holography for industrial instrumentation”, The 2016 EMN Qingdao Meeting (Qingdao, China), 7-10 June, 1page, 2016. (Invited)
  • M. Yokota, K. Takeda, "Straight pipe inspection system by using multiwavelength digital holography", 8th International Conference on Advanced Micro-Device Engineering(AMDE2016) (Kiryu, Japan), 12-9 Dec., 34, 2016
  • K. Okada, M. Yokota, "Analysis of multi-layer coatings based on temporal variation of intensity and phase by using low coherence digital holography", 8th International Conference on Advanced Micro-Device Engineering(AMDE2016) (Kiryu, Japan), 12-9 Dec., 104, 2016
  • E. Kusunoki, M. Yokota, "Monitoring of the drying process for tiny ink dots having different glycerin concentration using digital holographic microscopy", 8th International Conference on Advanced Micro-Device Engineering(AMDE2016) (Kiryu, Japan), 12-9 Dec., 105, 2016

 

2014

  • M. Yokota, "Digital holographic inspection for a straight pipe inner surface using multiwavelength illuminations", International Conference on Optoelectronic Technology and Application 2014 (IPTA2014) (Beijing, China), 13-15 May, 2014, invited.
  • T. Koyama, M. Yokota, "Measurement of the Straight Pipe Inner Surface by using Multiwavelength Color Digital Holography", SICE Annual Conference(SICE2014) (Sapporo, Japan), 9-12 Sep., 1932-1935, 2014
  • M. Yokota, K. Nomura, and M. Konishi"Analysis of reconstructed images in phase-shifting digital holography using plastic optical fiber image guide for the hologram transmission", 6th International Conference on Advanced Micro-Device Engineering(AMDE2014) (Kiryu, Japan), 12-5 Dec., 121, 2014
  • T. Koyama, M. Yokota, "Inspection system for a straight pipe inner surface by using multiwavelength digital holography", 6th International Conference on Advanced Micro-Device Engineering(AMDE2014) (Kiryu, Japan), 12-5 Dec., 122, 2014
  • F. Aoyama, M. Yokota, "Investigation of time dependence of dryness for a tiny ink dot by using digital holographic microscopy", 6th International Conference on Advanced Micro-Device Engineering(AMDE2014) (Kiryu, Japan), 12-5 Dec., 123, 2014

 

2013

  • M. Yokota, T. Koyama, and T. Kawakami, “Digital holographic inspection for the straight pipe inner surface using multiwavelength from laser diodes,”2013 Optical Metrology (Munich, Germany), 13-16 May, 8788- 18, 9 page, 2013.
  • T. Koyama, T. Kawakami and M. Yokota, “Development of a measurement system for pipe inner surface using multi-wavelength digital holography”, The Tenth Japan-Finland Joint Symposium on Optics Engineerring (OIE ' 13) (Utsunomiya, Japan), 2-5 Sep., pp. 87-88, 2013.
  • K. Ishikura and M. Yokota, “Reduction of noise due to environmental disturbances in an analysis of paint drying process using digital holography and gravimetric measurement”, The Tenth Japan-Finland Joint Symposium on Optics Engineerring (OIE ' 13) (Utsunomiya, Tochigi), 2-5 Sep., pp. 91-92, 2013.
  • M. Yokota, “Digital holographic inspection of a paint drying process,” The 3rd Korea-Japan Workshop on Digital Holography and Information Photonics (DHIP2013) (Daejeon, Korea), 19-21 Nov., 2 page, 2013. (invited)
  • Keisuke Nomura and Masayuki Yokota, “Study of hologram transmission by a high core-number plastic optical fiber(POF)image guide in phase-shifting digital holography,” System Integration International 2013 (SII2013) (Kobe, Japan), 15-17 Dec., 6 page, 2013.

 

2012

  • M. Yokota and Y. Kimoto, “Analysis of a drying state of paint using digital holographic and gravimetric measurement”, Technical digest of 5th International Conference on Optical Measurement Techniques for Structures & Systems (OPTIMESS2012) (Antwerp, Belgium), 4-5 April, 7-page, 2012.
  • K. Nomura and M. Yokota, “Transmission of hologram using a plastic optical fiber (POF) image guide in phase-shifting digital holography”, The 2nd Japan-Korea Workshop on Digital Holography and Information Photonics (DHIP2012)(Tokushima, Japan), 19-21 Nov., C016, 2page, 2012.

 

2011

  • M. Yokota and T. Adachi, “Digital holographic profilometry applied to an inspection of a pipe inner surface,”Digital holography and three-dimensional imaging (DH) on CD-ROM (OSA, Wasihigton, DC) DWC14 (Tokyo,Japan), 9-11 May, pp.1-3, 2011.
  • M. Yokota, T. Kawakami and Y. Kimoto, “Paint drying process monitored by digital holography and estimation of tack-free time,”Digital holography and three-dimensional imaging (DH) on CD-ROM (OSA, Washington, DC) DTuC38 (Tokyo, Japan), 9-11 May, pp.1-3, 2011.
  • M. Yokota, T. Kawakami and Y. Kimoto, “Investigation of a paint drying to tack free using digital holography and a gravimetric method,”Technical digest of 9th Japan-Finland Joint Symposium on Optics in Engineering (OIE’11) (Turku, Finland), 8-10 Sep., pp. 70-71, 2011.

 

2010

  • M. Yokota, Y. Kimoto, T. Adachi and I. Yamaguchi, “Monitoring of drying process of paint by digital holography,”Proceedings of 10th International Symposium on Measurement and Quality Control(ISMQC2010)(CD-ROM), (Osaka, Japan), 5-9 Sep., pp. C6-133-1-4, 2010.
  • M. Yokota, Y.Sakamoto and T.Adachi, “Measurement of inner surface profile of a tube using two wavelength phase-shifting digital holography,”Proceedings of SPIE Photonics Asia 2010, (Beijing, China), 18-21 Oct., 2010.(Proc. of SPIE Vol. 7848, pp. 78481A1-A9, 2010.

 

2009

  • M. Yokota and N. Ishitobi, "Application of two wavelength phase-shifting digital holography to an estimation of inner surface profile of a tube," Technical digest of 8th Japan-Finland Joint Symposium on Optics in Engineering (OIE’09) (Tokyo, Japan), 3-5 Sep., pp. 15-16, 2009.
  • T. Adachi, M. Yokota and I. Yamaguchi, "Monitoring of paint drying state by phase-shifting digital holography," Technical digest of 8th Japan-Finland Joint Symposium on Optics in Engineering (OIE’09) (Tokyo, Japan), 3-5 Sep., pp. 111-112, 2009.

 

2008

  • M. Yokota, "Photoelastic analysis by off-axis digital holography with single reference beam," Asian conference on mechanics of functional materials and structures (ACMFMS'08)(Matsue, Japan), 31 Oct.-3 Nov., pp. 373-376, 2008.

 

2017年03月15日