—›’ë@•›‹³Žö ”ŽŽmiHŠwjC”Ž导

ª‘åŠw Ž©‘R‰ÈŠwŒ¤‹†‰È Š÷ŠB电Ÿƒ电ŽqHŠw领ˆæ Š÷ŠB设计‹³Œ¤Žº 负责l

岛ª‘åŠw Ž©‘R‰ÈŠwŒ¤‹†‰È •‘®产ŠwŠ¯‹³ˆç„进’†S •›Žå”C

 

Œn’nš¬F

§690-8504 “ú–{ ªŒ§¼]Žs¼ì’Ã’¬1060

ª‘åŠw Ž©‘R‰ÈŠwŒ¤‹†‰È Š÷ŠB电Ÿƒ电ŽqHŠw领ˆæ

电话˜a^F(0852)-32-8908iŒöŽºj

E-mail: shutingli@riko.shimane-u.ac.jp

 

@F

1982”N9ŒŽ-1986”N7ŒŽ,@¼–kH‘åŠwsŠí§‘¢H’öŒniHŠwŠwŽmj

1986”N9ŒŽ-1989”N4ŒŽ,@¼–kH‘åŠwŒ¤‹†¶‰@Š÷ŠBŠw专业硕ŽmŒ¤‹†¶iHŠwŽmj

1989”N5ŒŽ-1994”N2ŒŽ,@¼–kH‘åŠwŠ÷ŠBŒnŠ÷ŠB设计‹³Œ¤Žº •‹³E讲师

1994”N4ŒŽ-1995”N3ŒŽ,@ŽRŒû‘åŠwHŠw•”Š÷ŠBHŠw‰È Œ¤‹†ŽÒ

1995”N4ŒŽ-1998”N3ŒŽ,@ŽRŒû‘åŠwŒ¤‹†¶‰@—HŠwŒ¤‹†‰È设计HŠwU”ŽŽm’öiHŠw”ŽŽmj

1998”N4ŒŽ-2011”N3ŒŽ,@”Ž“ÁŽzŽŒöŽi¸–§Š÷ŠB•ªŒöŽiE“¹•ªŒöŽi

2011”N4ŒŽ-Ý,@@ @ª‘åŠw ‡—HŠw•” Š÷ŠBŸƒŽqHŠw‰È

 

Šw术Šˆ动F

2000-2009”NC”ü‘sTransactions of ASME, Journal of Mechanical DesigntŽu•¶el

2006”NC”ü‘sTransaction of ASME, Journal of Vibration and AcousticstŽu•¶el

2008”NC”ü‘sMechanics of Advanced Materials and StructurestŽu•¶el

2011, 2013-2016”N,‰p‘sProceedings of the Institution of Mechanical Engineers,

Part C, Journal of Mechanical Engineering SciencetŽu•¶el

2005-2018”NCIFToMM(‘Š÷Šw˜aŠ÷Ší‰ÈŠw‡‰ï)sMechanism and Machine Theoryt(Elsevier Press)Žu•¶el

2006”NC‘sApplied Mathematical Modellingt(Elsevier Press)Žu•¶el

2009”N, Bentham Science Publisherso”ŎГIŠ÷ŠBÐo”Å审查ˆÏ

2010”N, ‘sMechanics Based Design of Structures and MachinestŽu•¶el

2010-2011”N, ‘sMeccanicatŽu•¶el

2010”N, ‘sThe International Journal of Mechanical Sciencest(Elsevier Press)Žu•¶el

2010”N, The International Conference on Power Transmissions (ICPT'2011), Scientific Committee & Section Chairs.

2011”N, ‘sJournal of Mechanical EngineeringtŽu•¶el

2011”N, The 4th International Conference on Power Transmissions(2012 Romania), •¶el

2011”N, ‘sJournal of Applied Mechanical EngineeringtŽu•¶el

2012”N, ‘sInternational Journal of Engineering, Science and Technologyt杂Žu•¶el

2009,2014”N, ˆó“xsIndian Journal of Engineering & Materials SciencestŽu•¶el

2012”NCˆó“x‘‰Æ—HŠw‰@National Institute of Technology (NIT) ”ŽŽm•¶审查ˆÏ员‰ï‘际ˆÏ员

2012”N, sMultidiscipline Modeling in Materials and StructurestŽu•¶el

2012”NC“ú–{sJournal of Advanced Mechanical Design, Systems, and Manufacturingt杂Žu•¶el

2012”NC“ú–{Š÷ŠBŠw‰ï2012”N”NŽŸ‘å‰ï•ª‰ïŽåÈ

2013-2014”NCsChinese Journal of Aeronautics(’†‘q‹óŠw)t(Elsevier Press)Žu•¶el

2013”NCsScientific Research and EssaystŽu•¶el

2013”NCsInternational Journal of Materials and Structural IntegritytŽu•¶el

2014”NC“ú–{Š÷ŠBŠw‰ï [’†‘Žl‘Žx•”g‘æ52Šú‰ïEŠw‰ïh] •ª‰ïŽåÈŒ“Â”N优G‰‰奖 ˆÏ

2014”NC“ú–{Š÷ŠBŠw‰ï [’†‘Žl‘Žx•”g‘æ44‰ñŠw¶‰ï员毕业Œ¤‹†•\Šw‰ïh] G‰‰ ˆÏ

2014/4-2016/3C“ú–{Š÷ŠBŠw‰ï Š÷ŠB—댏E润ŠŠE设计•”门 运营ˆÏ员‰ïˆÏ员

2015”NC“ú–{Š÷ŠBŠw‰ï [’†‘Žl‘Žx•”g‘æ53Šú‰ïEŠw‰ïh] Â”NG‰‰ ˆÏ

2015”NC“ú–{Š÷ŠBŠw‰ï [’†‘Žl‘Žx•”g‘æ45‰ñŠw¶‰ï员毕业Œ¤‹†•\Šw‰ïh] G‰‰ ˆÏ

2015”N, 10th International Symposium on Advanced Science and Technology in Experimental Mechanics, Member of Local Executive Committee & Member of Scientific Committee

2015”N9ŒŽ,“ú–{‹Z术’†Si东‹žjH’ö‹Z术Œn—ñ讲À Š÷ŠB传动专题Žå讲l

2016”N8ŒŽ,Mathematical Problems in Engineering publisher (Hindawi) •¶el

2016”N8ŒŽ,“ú–{‹Z’†Si‹žjH’ö‹ZŒn—ñÀ Š÷ŠB—댏˜aŠ÷ŠB设计专题Žå讲l

2016”N10ŒŽ,ˆó“x—HŠw‰@Indian Institute of Technology (IIT) ”ŽŽm论•¶审查ˆÏ员‰ï‘际ˆÏ员

2017”N3ŒŽ,“ú–{‹Z’†Si‹žjH’ö‹ZŒn—ñÀ 齿轮设计C强“x计ŽZCU动š„º专题 Žål

2017”N4ŒŽ, ICCM2017 论•¶审elC•ª‰ïŽåÈ

2017”N4ŒŽ-,“ú–{Š÷ŠBŠw‰ï Š÷ŠB—댏E润ŠŠE设计•”门 运营ˆÏ员‰ïˆÏ员

2017”NCsEngineering Structurest(Elsevier Press)杂Žu论•¶审el

2017”NCsJournal of Zhejiang University-SCIENCE AtŽu•¶el

2017”NCsJournal of the Brazilian Society of Mechanical Sciences and EngineeringtŽu•¶el

2017”NCsJournal of Sound and Vibrationt(Elsevier Press)杂Žu论•¶审el

2017”NCsMeasurementt(Elsevier Press)杂Žu论•¶审el

2018”N3 “ú–{‹Z术’†Si东‹žjH’ö‹Z术Œn—ñ讲À Š÷ŠB—댏˜aŠ÷ŠB设计专题Žå讲l

2018”N9ŒŽ,“ú–{‹Z’†Si‹žjH’ö‹ZŒn—ñÀ 齿轮设计C强“x计ŽZCU动š„º专题 Žål

 

s“IŒ¤‹†F

‡@   —p˜°HŠ÷Šíl“I”g齿轮传动“IU“Á«•ªÍ

‡A   —p˜°Š÷—Í传动‘•’u“Iq‹ó齿轮“IŽõ–½预测Œ¤‹†

‡B   —p˜°Š÷—Í传动‘•’u“Iq‹ó齿轮“IU~š„–@Œ¤‹†

‡C   ŽO”–•Ç结构齿轮“I齿–ʉ׉ðÍ

‡D   —p˜°HŠ÷Šíl“I摆线齿轮减‘¬Š÷“I齿–ʉטa“x‰ðÍ

‡E   —p˜°HŠ÷Šíl“I‚q‚u‘¬Š÷“IU~š„‹ZŒ¤‹†

‡F   ”¼‘Ì‚b‚u‚cC‚c‚u‚cŒõ”À^‹óŠ÷Šíl“I

‡G   —p˜°HŠ÷Šíl“I‚¸“x‚负载”\—Í”g齿轮传动‘•’u“I

‡H   摆线减‘¬Š÷“I设计ŽQ”C«”\测试CÞ—¿C热处—˜a“x•ªÍ

‡I   ‚“x‚q‚u‘¬Š÷“IÞ—¿˜a热处—‹Z术开发

‡J   —p˜°”T‰ÁH’†S“I‚¸“xŽ©•ª“x‘•’u“I

‡K   ’nkCVŠ±线电车紧‹}§•û–@˜aˆÀ‘S«’T

‡L   —L‘j§‘•’u“IVŠ±线电车“I‹óŸƒ—ÍŠw‰ðÍ

‡M   §动电Ž¥”°“IŽ¥/Ž¥—Í“I—LŒÀŒ³‰ðÍ

‡N   ‚‘¬—ñ“IU˜aÚ—Í•ªÍ

 

杂Žu论•¶F

1.     Shuting Li, gA mathematical model and numeric method for contact analysis of rolling bearingsh, Mechanism and Machine Theory, Elsevier Press, Vol. 119, 2018, pp.61-73 (Most Downloaded Mechanism and Machine Theory Articles)

2.     Shuting Li, gDiaphragm stress analysis and fatigue strength evaluation of the flex-spline, a very thin-walled spur gear used in the strain wave gearingh, Mechanism and Machine Theory, Elsevier Press, Volume 104, October 2016, pp.1-16

3.     Shuting Li, gEffects of misalignment error, tooth modifications and transmitted torque on tooth engagements of a pair of spur gearsh, Mechanism and Machine Theory, Elsevier Press, Vol. 83, 2015, pp.125-136(Top 25 Hottest Articles, http://top25.sciencedirect.com/)

4.     Shuting Li, gThe latest design technologies for gear devices with great transmission ratiosh, Power Transmission Engineering, Randall Publications LLC, USA, Dec. 2014, pp.70-76

5.     Shuting Li, gDesign and strength analysis methods of trochoidal gear reducersh, Mechanism and Machine Theory, Elsevier Press, Volume 81, 2014, pp.140-154(Top 25 Hottest Articles, http://top25.sciencedirect.com/)

6.     Shuting Li, gEffects of centrifugal load on tooth contact stresses and bending stresses of  thin-rimmed spur gears with inclined websh, Mechanism and Machine Theory, Vol. 59, Issue 1, 2013, pp. 34-47

7.     Shuting Li, gContact Stress and Root Stress Analyses of Thin-Rimmed Spur Gears with Inclined Websh, Trans. ASME, Journal of Mechanical Design, vol.:134 No. Issue 5, 2012 (gASME Top 10 Most Downloaded Articles, ASME Journal of Mechanical Designh)

8.     Shuting Li, gA challenge to design of a new harmonic drive deviceh, Applied Mechanics and Materials, Vol.86, pp.43-46, 2011

9.     Shuting Li, gLoaded gear contact analyses for pin gear reducersh, Applied Mechanics and Materials, Vol.86, pp.129-132, 2011

10.  Shuting Li, gEffect of addendum on contact strength, bending strength and basic performance parameters of a pair of spur gearsh, Mechanism and Machine Theory, Elsevier Press, 2008, Volume 43, Issue 12, pp.1557-1584(Top 25 Hottest Articles, http://top25.sciencedirect.com/)

11.  Shuting Li, gContact problem and numeric method of a planetary drive with small teeth number differenceh, Mechanism and Machine Theory, Elsevier Press, Volume 43, Issue 9, 2008, Volume 43, Issue 9, pp.1065-1086 (Top 25 Hottest Articles, http://top25.sciencedirect.com/)

12.  Shuting Li, gExperimental and Theoretical Investigations into Vibration Behavior of Three-dimensional, Thin-walled Spur Gears in a Power-Circulating Test Righ, Mechanism and Machine Theory, Elsevier Press, Volume 43, Issue 8, 2008, pp.934-963

13.  Shuting Li, gCentrifugal Load and Its Effects on Bending Strength and Contact Strength Design of a High Speed Thin-Walled Gear with Offset Webh, Mechanism and Machine Theory, Elsevier Press, Volume 43, Issue 2, 2008, pp.217-239

14.  Shuting Li, gEffects of Machining Errors, Assembly Errors and Tooth Modifications on Load-Carrying Capacity, Load-Sharing Rate and Transmission Error of a Pair of Spur Gearh, Mechanism and Machine Theory, Elsevier Press, Volume 42, Issue 6, 2007, pp.698-726 (Top 25 Hottest Articles, http://top25.sciencedirect.com/)

15.  Shuting Li, gFinite Element Analyses for Contact Strength and Bending Strength of a Pair of Spur Gear with Machining Errors, Assembly Errors and Tooth Modificationsh, Mechanism and Machine Theory, Elsevier Press, Volume 42, Issue 1, 2007, pp.88-114 (Top 25 Hottest Articles, http://top25.sciencedirect.com/)

16.  Shuting Li, gGear Contact Model and Loaded Tooth Contact Analysis of a Three-Dimensional, Thin-Rimmed Gearh, Transactions of ASME, Journal of Mechanical Design, Vol. 124, Issue 3, Sept. 2002, pp.511-517

17.  Shuting Li, gDeformation and Bending Stress Analysis of Three-Dimensional, Thin-Rimmed Gearsh, Transactions of ASME, Journal of Mechanical Design, Vol. 124, Issue 1, March 2002, pp.129-135

18.  T Ishida and Shuting Li, gA method for analyzing tooth load distribution and contact stress of a thin wall spur gear using FEM and a mathematical programming methodh, Trans. JSME Series C, Vol.63, No.606, pp.585-591, 1997

19.  Shuting Li and T. Ishida, gA method of analyzing tooth load distribution for a thin wall spur gear with assembly errorsh, Trans. JSME, Series C, Vol.63, No.615, pp.4017-4024, 1997

20.  T. Ishida, T. Yoshida and Shuting Li, gRelationships among face width, amount of gear error, gear dimension, applied torque and tooth load in cycloidal gearsh, Trans. JSME, Series C, Vol.64, No.623, pp.2711-2717,1998

21.  Takeshi Ishida, Shuting Li, Takahiro Yoshida, Teruaki Hidaka, LE RUOTE DENTATE CICLOIDAL a corona sottile, ORGANI DI TRASMISSIONE (ˆÓ‘å—˜), 1997”N11ŒŽCpp.48-56.

22.    ’¾ˆò•¶C—›’ë˜a“V‘¶, 齿轮Œn减U设计“I构灵•q“x•ªÍCŠ÷ŠBH’öŠw, 1996”N10ŒŽCVol.32,No.5,pp.13-18.

23.    —›’ëC’¾ˆò•¶C‰½‘å˜a刘@X, ¬“x‰º_“›‘̐U“I—LŒÀŒ³•ªÍCŠ÷ŠBH’öŠwC1994”N, úŠ§C‘æ30™ÉCpp.128-133.

24.    —›’ëC’¾ˆò•¶˜a“V‘¶Cq‹ó齿轮“I动态设计Cq‹óŠw, 1994”N8ŒŽCVol.15, No.8, pp.937-941

25.    ’¾ˆò•¶C“¯‹¨C—›’ëC“V‘¶, _«滚动轴³“IU•ªÍ, Š÷ŠB‰ÈŠw—^‹Z, 1995”NNo.05

26.    ’¾ˆò•¶C—›’ëC“V‘¶, ‘j“ò夹层结构减U“IÅ‰À‘j“òˆÊ’u预测C¼–kH‘åŠwŠwC1995C13(3)331`335

27.    刘X, “V‘¶, —›’ë ,‰iË, ŽOCŒ`”–轮缘ŽÎ齿轮‹¤U—͉e响“I实验Œ¤‹†, q‹ó—ÍŠw1996

28.    ‰iË,刘X,“V‘¶,—›’ë, ”–轮缘ŽÎ齿轮结动应—Í“I实验Œ¤‹†, q‹ó—ÍŠw,1995,No.4

29.    ’¾ˆò•¶C“V‘¶˜a—›’ë, ”g齿轮传动“I_轮实验–Í•ªÍCŠ÷ŠB传动,1994”N2ŒŽC Vo1.18, No.1, pp.37-39.

30.    —›’ë, ˆê种—p˜°U‰ðÍ“I«‘Ì—^壳‘̐ڕ”“I‚P‚R“_“nŒ³CU—^™tC1994”N12ŒŽAVol.13, No.4 pp.56-61,

31.    —›’ëC刘XC‰½‘å˜a’¾ˆò•¶, 齿轮动态Œn”ñ线«•û’ö‹‰ð“I“R‘ã摄动–@CŠ÷ŠB‰ÈŠw—^‹Z, 1994”N5ŒŽ,‘Š§, pp.44-50

32.    ’¾ˆò•¶˜a—›’ë, ŒÊ齿谐”g齿轮传动“I‡•ªÍCŠ÷ŠB‰ÈŠw—^‹Z, 1989”N2ŒŽ, Vol.29,No.1, pp.20-26,

33.    tC—›’ë˜a’¾ˆò•¶C”g齿轮传动“I‘½–Ú标优‰»‰»设计“IŒ¤‹†C齿轮, 1989”N2ŒŽ, Vol.13, No.1, pp.10-14.

 

‘际‰ï议论•¶F

1.        Shuting Li and M. Motooka, A finite element method used for contact analysis of rolling bearings, The 8th International Conference on Computational Methods (ICCM2017), 2017/7, Guilin, China.

2.        Shuting Li and Yuki Kono, Transmission Error Construction of a Pair of Spur Gears Based on Gear Accuracy Data MeasuredCThe JSME International Conference on Motion and Power Transmissions (MPT2017-Kyoto), 2017/3/2

3.        Shuting Li and Ryuichi SONEZAKI, gEffect of Machining Errors on Vibration Level of Spur Gearsh, 10th International Symposium on Advanced Science and Technology in Experimental Mechanics, Nov., 2015, Japan

4.        S. Li and A. Nishimura, gDynamic Behavior Analysis of a Pair of Ground Spur Gearsh, The 6th International Conference on Manufacturing, Machine Design and Tribology (ICMDT2015), Japan, (4/2015)

5.        Shuting Li, The latest design technologies for gear devices with great transmission ratios, International Gear Conference, Aug. 25-28, 2014, INSA-Lyon, France.

6.        Shuting LiCSTRESS ANALYSIS AND STRENGTH DESIGN METHOD OF A TROCHOIDAL GEAR REDUCER, The 11th World Congress in Mechanism and Machine Science (IFToMM-2003), April 1 2004, Tianjin, China.

7.        Shuting Li and Yunwen ShenCFATIGUE FAILURE PATTERNS AND STRENGTH DESIGN METHODS OF A HARMONIC DRIVE DEVICE, The 11th World Congress in Mechanism and Machine Science (IFToMM-2003), April 1 2004, Tianjin, China.

8.        Shuting LiCStudy On Dynamic Behavior of Three-dimensional, Thin-rimmed Spur Gears, The JSME International Conference on Motion and Power Transmissions in Fukuoka (MPT2001-Fukuoka), Nov. 2001, Vol. I, pp.15-20.

9.        Takeshi Ishida, Shuting Li, Takahiro Yoshida and Teruaki HidakaCTooth Load of Thin Rim Cycloidal Gear, The ASME 7th International Power Transmission and Gearing Conference, DE-VOL.88, October, 1996, SAN DIEGO, CALIFORNIA, pp.565-571.

10.    Shuting Li, Yunwen Shen, Geng Liu and Tiancun LinCDynamic Behavior of the Flexspline of a Harmonic Drive, The Second International Conference On Mechanical Dynamics and its Applications in Engineering, October, 1992, Zhengjiang, China, pp.165-168.

11.    Shuting Li, gA Challenge to Design of a New Harmonic Drive Deviceh, The International Conference on Power Transmission (ICPT2011), Xifan, China, 2011

12.    Shuting Li,gLoaded Gear Contact Analyses for Pin Gear Reducers hCThe International Conference on Power Transmission (ICPT2011), Xifan, China, 2011

 

‘“à‰ï议论•¶F

1.   —›@Ž÷’ëCŠâ²@ˆ»CƒTƒCƒNƒƒCƒhŒ¸‘¬‹@‚Ì‚Ë‚¶‚荄«‚ÉŠÖ‚·‚闝˜_‰ðÍ‹yŽÀŒ±Œ¤‹†C“ú–{‹@ŠBŠw‰ï ’†‘Žl‘Šw¶‰ïA‘æ48‰ñŠw¶ˆõ‘²‹ÆŒ¤‹†”­•\u‰‰‰ïA“¿“‡‘åŠwA2018”N3ŒŽ

2.   —›@Ž÷’ë,@ŽRª@q‰îC‘½ƒ[ƒu”g“®Ž•ŽÔ‘•’u‚̐݌v‚ÉŠÖ‚·‚闝˜_Œ¤‹†C“ú–{‹@ŠBŠw‰ï ’†‘Žl‘Šw¶‰ïA‘æ48‰ñŠw¶ˆõ‘²‹ÆŒ¤‹†”­•\u‰‰‰ïA“¿“‡‘åŠwA2018”N3ŒŽ

3.   •½¬£@’qÆC—›@Ž÷’ëCˆê‘΂̎•ŽÔ‚̐U“®‰ðÍ‚Ì—˜_•û–@‚ÉŠÖ‚·‚錤‹†C“ú–{‹@ŠBŠw‰ï ’†‘Žl‘Šw¶‰ïA‘æ48‰ñŠw¶ˆõ‘²‹ÆŒ¤‹†”­•\u‰‰‰ïA“¿“‡‘åŠwA2018”N3ŒŽ

4.   ‰Í–ì@—S‹P—›Ž÷’ëC•½Ž•ŽÔ‚Ì“`’BŒë·‚ÉŠÖ‚·‚闝˜_‰ðÍ‚ÆŽÀŒ±Œ¤‹†C“ú–{‹@ŠBŠw‰ï 2017”N“x”NŽŸ‘å‰ïCé‹Ê‘åŠwA2017”N9ŒŽ3“ú`6“ú

5.   –{‰ª@³KC—›Ž÷’ëC“]‚ª‚莲Žó‚̐ڐG‰ðÍ—˜_‹y‚ÑŽÀŒ±‚ÉŠÖ‚·‚錤‹†C“ú–{‹@ŠBŠw‰ï 2017”N“x”NŽŸ‘å‰ïCé‹Ê‘åŠwA2017”N9ŒŽ3“ú`6“ú

6.   ‰Í–ì@—S‹P—›Ž÷’ëC‘΂̃zƒuØ‚蕽Ž•ŽÔ‚Ì“`’BŒë·‰ðÍ–@C“ú–{‹@ŠBŠw‰ï ’†‘Žl‘Šw¶‰ïA‘æ47‰ñŠw¶ˆõ‘²‹ÆŒ¤‹†”­•\u‰‰‰ïAL“‡H‹Æ‘åŠwA2017”N3ŒŽ6“ú

7.   —›Ž÷’ëC–{‰ª@³KC“]‚ª‚莲Žó‚̃‰ƒWƒAƒ‹„«‰ðÍ‚ÉŠÖ‚·‚錤‹†A“ú–{‹@ŠBŠw‰ïA’†‘Žl‘Šw¶‰ïA‘æ47‰ñŠw¶ˆõ‘²‹ÆŒ¤‹†”­•\u‰‰‰ïAL“‡H‹Æ‘åŠwA2017”N3ŒŽ6“ú

8.   —›Ž÷’ëC“]‚ª‚莲Žó‚̍‚¸“xÚG‰ðÍŽè–@‚Ì’ñˆÄ‚ÉŠÖ‚·‚錤‹†C“ú–{‹@ŠBŠw‰ï2016”N“x”NŽŸ‘å‰ï@2016”N9ŒŽ

9.   —›Ž÷’ëC”g“®Ž•ŽÔ‘•’u‚É‚¨‚¯‚é‹É”–“÷•½Ž•ŽÔ‚̃_ƒCƒAƒtƒ‰ƒ€‰ž—͉ðÍ‚ÉŠÖ‚·‚錤‹†C“ú–{‹@ŠBŠw‰ï2015”N“x”NŽŸ‘å‰ï@2015”N9ŒŽ

10. —›Ž÷’ëCŽ•ŽÔ‘•’u‚É‚¨‚¯‚éU“®Œ¤‹†‹y‚щۑèA“ú–{‹@ŠBŠw‰ïAU“®Šî‘bŒ¤‹†‰ï2015”N9ŒŽ26-27“ú

11. —›Ž÷’ëC–ì“c^‹`C”g“®Ž•ŽÔ‘•’u‚̍À‹ü‹­“x‰ðÍ‚ÉŠÖ‚·‚錤‹†C“ú–{‹@ŠBŠw‰ï’†‘Žl‘Žx•”‘æ53Šú‘‰ïEu‰‰‰ï 2015”N3ŒŽ

12. ¼‘º “āC—› Ž÷’ëC“®—Í‹zŽûŽ®Ž•ŽÔŽŽŒ±‘•’u‚ð—p‚¢‚½‚¸“x•½Ž•ŽÔ‚̐U“®‚ÉŠÖ‚·‚éŽÀŒ±Œ¤‹†C“ú–{‹@ŠBŠw‰ï’†‘Žl‘Žx•”‘æ53Šú‘‰ïEu‰‰‰ï 2015”N3ŒŽ

13. —›Ž÷’ëC—LŒÀ—v‘f–@‚É‚æ‚éƒgƒƒRƒCƒhŽ•Œ`Ž•ŽÔ‘•’u‚̐ڐG‰ðÍC“ú–{‹@ŠBŠw‰ï2014”N“x”NŽŸ‘å‰ï@2014”N9ŒŽ

14. ‘]ªè—´ˆêC—›Ž÷’ëC“]‚ª‚莲Žó‚̐ڐG‰ðÍ‹y‚э„«‘ª’莎Œ±‘•’u‚̐݌v‚ÉŠÖ‚·‚錤‹†C“ú–{‹@ŠBŠw‰ï2014”N“x”NŽŸ‘å‰ï@2014”N9ŒŽ

15. —›Ž÷’ëC–ì“c^‹`C”g“®Ž•ŽÔ‘•’u‚ÌŽ•‚Ì‚©‚Ý‚ ‚¢‰ðÍ‹y‚ѐ»}ƒ\ƒtƒg‚ÌŠJ”­‚ÉŠÖ‚·‚錤‹†C“ú–{‹@ŠBŠw‰ï’†‘Žl‘Žx•”‘æ52Šú‘‰ïEu‰‰‰ï 2014”N

16. —›Ž÷’ëCAutoCAD‚ÉŠî‚¢‚½Ž•ŽÔ‘•’u‚̐݌vŒvŽZE»}ƒ\ƒtƒg‚ÌŠJ”­C“ú–{‹@ŠBŠw‰ïMPT2013ƒVƒ“ƒvƒWƒEƒ€ƒ“`’B‘•’u„ 2013”N

17. —›Ž÷’ë, ¼‘º“āCˆê‘΂̕½Ž•ŽÔ‚Ì•½“™Ž•Œ³‹È‚°‹­‚³‚̐݌v‚ÉŠÖ‚·‚錤‹†C“ú–{‹@ŠBŠw‰ï2013”N“x”NŽŸ‘å‰ï˜_•¶C2013

18. —›Ž÷’ë, •½Ž•ŽÔ‚ÌŽ•‚Ì‚©‚Ý‚ ‚¢„«‚É‹y‚Ú‚·Ž•ŽÔ‰ÁH¸“x‹y‚ÑŽ•–ʏC®‚̉e‹¿C“ú–{‹@ŠBŠw‰ï2012”N“x”NŽŸ‘å‰ï@2012”N9ŒŽ

19. —›Ž÷’ë, ‚‘¬—ñŽÔ‚ÌŽ©˜A—Í‹y‚Ñ‘OŒãU“®‚É‹y‚Ú‚·§“®ƒpƒ^[ƒ“‚̉e‹¿‚ÉŠÖ‚·‚錤‹†C“ú–{‹@ŠBŠw‰ï@‘æ20‰ñ@Œð’ʁE•¨—¬•”–å‘å‰ïA2011”N12ŒŽ7`9“ú

20. Shuting Li, Root and Surface Contact Stress Analyses of Three-Dimensional, Thin-rimmed gears with Inclined Web under Torque and Centrifugal Load Conditions, “ú–{‹@ŠBŠw‰ï2011”N“x”NŽŸ‘å‰ï. 2011”N9ŒŽ11`14“ú

21. Suting LiCMesh Stiffness and Its Non-Linearity of a Pair of Spur Gears with Machining Errors, Assembly Errors and Tooth Modifications, MPT2004ƒVƒ“ƒ|ƒWƒEƒ€ƒ“`’B‘•’u„u‰‰˜_•¶WA“ú–{‹@ŠBŠw‰ï‹@‘fŠŠÝŒv•”–åA2004”N11ŒŽ26-27“ú, pp.202-205.

22. —›Ž÷’ë, ŽOŽŸŒ³\‘¢‹É”–“÷•½Ž•ŽÔ‚Ì”æ˜J”j‰óƒpƒ^[ƒ“‹y‚Ñ‹­“xÝŒv‚ÉŠÖ‚·‚錤‹†, MPT2004ƒVƒ“ƒ|ƒWƒEƒ€ƒ“`’B‘•’u„u‰‰˜_•¶W“ú–{‹@ŠBŠw‰ï‹@‘fŠŠÝŒv•”–åA2004”N11ŒŽ26-27“úApp.128-129.

23. —›@Ž÷’ëC“c’†@§‘¾˜YCŽ•Œ`C®‚ð—L‚·‚éƒTƒCƒNƒƒCƒhŒ¸‘¬‹@‚̐ڐG‹­“x‰ðÍC’†‘Žl‘Žx•”@‘æ56Šú‘‰ïEu‰‰‰ïC“¿“‡‘åŠwA2018”N3ŒŽ

24. —›Ž÷’ë, ‚Ž•Ž•ŽÔ‹y‚ÑŽ•Œ`C®Ž•ŽÔ‚ÌŽ•–ʐڐG‰ž—Í‚ÆŽ•Œ³‹È‚°‰ž—͂̉ðÍ–@iContact and Bending Stress Analysis Methods of Gears with High Contact Ratio and Tooth ModificationsjC“ú–{‹@ŠBŠw‰ï“ŒŠCŽx•”ŽOd’n‹æu‰‰‰ïAu‰‰˜_•¶WANo.033-2, 2003”N9ŒŽ2“úApp.196-197.

25. —›Ž÷’ë, ŽOŽŸŒ³\‘¢”–“÷Ž•ŽÔ‚Ì‹¤UŽü”g”“Á«‚ÉŠÖ‚·‚éŽÀŒ±Œ¤‹†(Experimental Study on the Resonance Frequency Behavior of Three-dimensional, Thin-rimmed Gears)C“ú–{‹@ŠBŠw‰ï‚Q‚O‚O1”N“x”NŽŸ‘å‰ïAu‰‰˜_•¶WAVo‚Œ.‡V. 2001”N8ŒŽ27“ú`30“úApp.183-184.

26. —›Ž÷’ë, ŽOŽŸŒ³\‘¢”–“÷Ž•ŽÔ‚Ì•ÏŒ`‹y‚Ñ‹È‚°‰ž—Í(Deformation and Bending Stress Analysis of Three-dimensional, Thin-rimmed Gears)A“ú–{‹@ŠBŠw‰ï‚Q‚O‚O‚O”N“x”NŽŸ‘å‰ïAu‰‰˜_•¶WAVo‚Œ.‡U@2000”N8ŒŽ2“ú`4“úApp.429-430.

27. Î“c•A—›@Ž÷’ëA”‘º@‘AX@“Ö, ŽOŽŸŒ³\‘¢”–“÷•½Ž•ŽÔU“®“Á«‚ÉŠÖ‚·‚錤‹† (Dynamic Behavior of a Three-Dimensional, Thin-Rimmed Spur Gear)C“ú–{‹@ŠBŠw‰ï’†‘Žl‘Žx•”‘‰ïAVol.36, 1998”N3ŒŽApp.311-312.

28. —›Ž÷’ëAÎ“c•, ‘g—§Œë·‚ðŽ‚ÂŽOŽŸŒ³\‘¢”–“÷•½Ž•ŽÔ‚ÌŽ•–ʉ׏d‚ÌŒvŽZ–@(A Method of Analyzing Tooth Load Distribution For a Thin Wall Spur Gear), “ú–{‹@ŠBŠw‰ï‘n—§‚P‚O‚OŽü”N‹L”Ou‰‰‰ïANo.97-14, IMPT-100u‰‰˜_•¶WA1997”N7ŒŽ28“ú`30“ú, pp.227|230.

29. Î“c•A—›Ž÷’ë, ŽOŽŸŒ³\‘¢”–“÷•½Ž•ŽÔ‚ÌŽ•–ʉ׏d‹y‚ѐڐG‰ž—Í(Tooth Load Distribution and Contact Stress of a Thin Wall Spur Gear), “ú–{‹@ŠBŠw‰ïC‘æ‚V‚SŠú‘S‘‘å‰ïu‰‰˜_•¶WAVol.4A1996”N9ŒŽ21“ú`23“úCpp.157-158.

30. Î“c•A—›Ž÷’ëA‘¼3–¼, ƒTƒCƒNƒƒCƒhŽ•ŽÔ‚ÌŽ•–ʉ׏d‚É‹y‚Ú‚·Ž••AŽ•ŽÔ‚Ì‘å‚«‚³AŒë·A•‰‰×ƒgƒ‹ƒN‚̉e‹¿(Effects of Tooth Width, Gear Size, Machining Tolerances and Loading Torque on Tooth Load of a Cycloid Gear), “ú–{‹@ŠBŠw‰ï’†‘Žl‘Žx•”ŽRŒû’n•ûu‰‰‰ïAu‰‰˜_•¶WANo.955-2A1995”N11ŒŽ18“úApp.227-230.

 

专—˜:

1.        S. Li, Harmonic drive device, Chinese Patent No.CN101031737

2.        S. Li, Wave gear device, United States Patent No. US 2008/0060473

3.        S. Li, Harmonic drive device, Japanese Patent No. 2004-287451 (2006-97861)

4.        S. Li, A new type of silk-hat harmonic drive, Japanese Patent No. 2005-197244 (2007-16838)

5.        S. Li, Gear devices with eccentric rocking movement, Japanese Patent No. 2008-263644(2010-91073)

6.        S. Li and others, Power transmission deviceCJapanese Patent No. 2009-60097(2010-210073)

7.        S. Li and others, Controlling method of aerodynamic brake, Application number: 20130138278, Issued: May 30, 2013, Application Serial: 13/814,908

8.        S. Li, Wave gear device, European Patent EP1813836

9.        S. Li, Eccentric rocking type gear device, Pub. No.WO/2010/041549, International Application No.PCT/JP2009/066376

 

V闻杂Žu报“¹F

1.       2015”N ”í“ú–{g轴³V闻h Š报“¹B“ú–{g轴³V闻h为–ÊŒü“ú–{Še‘åŠ÷ŠBŠé业“I专业报纸B

2.       2016”N ”í“ú–{ gTribologyh杂ŽuŠ报“¹C“ú–{gTribologyh杂Žu为每ŒŽ发s3–œ•”“IŒŽŠ§杂ŽuBŽå—v发s对Û为“ú–{Še‘åŠ÷ŠBŠé业B

3.       2017”N ”í“ú–{ gTribologyh杂Žuç±请为–{Š§举办“IgŠ÷ŠB—댏h“ÁWïŽÊŠ§头˜•¶gFront Columnh

 

ZŠé‡ì关ŒnF

1.       —^“ú–{‘“à15‰Æ‘å’†Œ^Š÷ŠBŠé业搞‹¤“¯Œ¤‹†

2.       为“ú–{‘“à20‰ÆŠé业’ñ‹Ÿ过‹Z术•ž务

3.       给“ú–{‘“à‹D车C电Š÷“™40‰Æ‘å’†Œ^Šé业’ñ‹Ÿ职员“I‹Z术”|训

 

Back to Home